Cutting machine×メイハン - List of Manufacturers, Suppliers, Companies and Products

Cutting machine Product List

1～10 item / All 10 items

Displayed results
Wet Cutting Machine NC-65

Wet Cutting Machine NC-65

Wet Cutting Machine NC-65

- Three-phase 200V (3 kW) - Spindle motor speed: 2800 rpm - Maximum blade diameter: 350 mm (hole diameter 25.4 mm) - Maximum cutting length: 650 mm - Maximum cutting thickness: 100 mm (however, the thickness that can be cut in one pass varies depending on the material) - Main body dimensions: 1070 x 660 x 1300 mm - Main body weight: 90 kg - Capable of cutting at angles from 0 to 45° - Equipped with a small pump for circulating coolant - Other models available according to cutting length: NC-150LX, NC-200Auto, NC-250Auto.

  • Tile work
  • Interior and exterior construction accessories
  • stone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wet and dry cutting machine 'ESC-125'

Wet and dry cutting machine 'ESC-125'

A single unit that performs four functions: wet/dry grooving/cutting. This product allows for the removal of the guide.

The "ESC-125" is a circular saw type cutting machine that can cut straight along the workpiece side using the included linear guide, suitable for both wet and dry cutting. The guide is removable. It can perform wet/dry grooving/cutting with a single unit. In addition to standard cutting diamond blades, it also accommodates R cutters for thick substrates and thick grooving blades. 【Features】 ■ Circular saw type ■ Includes water supply device for wet cutting ■ Equipped with a ground fault circuit interrupter (GFCI) ■ Compatible with R cutters for thick substrates and thick grooving blades in addition to standard cutting diamond blades *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dust-collecting dry cutting machine "MD-305X" for cutting soft refractory bricks, tiles, and more.

Dust-collecting dry cutting machine "MD-305X" for cutting soft refractory bricks, tiles, and more.

Built-in dust collection system! Dust generated during cutting is collected in the dust bag, minimizing dispersion.

The "MD-305" is a multipurpose dry cutting machine for construction materials that can cut various materials such as tiles, roofing tiles, bricks, stone, and siding by simply replacing the dedicated blades, regardless of the type of material. It has a built-in dust collection system that gathers dust into a collection bag during cutting, minimizing dispersion. Additionally, there are no concerns about water or dust during cutting operations at the construction site. 【Features】 ■ Multipurpose design ■ Capable of cutting various materials by replacing with dedicated blades ■ Adjustable cutting depth ■ Table slide mechanism allows for 450mm sliding ■ Maximum cutting thickness of 100mm ■ Lightweight body weighing 26kg, easy to carry by one person *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wet cutting machine NC-150LX, maximum cutting length 1450 mm, three-phase 200V.

Wet cutting machine NC-150LX, maximum cutting length 1450 mm, three-phase 200V.

Cutting long tiles and other workpieces of 1450 mm length using a wet method.

■Dimensions: 2400x65x1420mm, 225kg ■Motor: Three-phase 200V, 4kW, 16.6A, 2800/3360 min-1 (50Hz/60Hz) ■Maximum cutting length: 1450mm ■Maximum cutting thickness: 150mm ■Blade diameter for use: Φ250 to Φ450mm, shaft diameter 30mm (low-speed rotating machine has a shaft diameter of 40mm) Note: When using blades of Φ400 to Φ450mm, it is necessary to change to a 1400 min-1 motor ■Blade cooling: Circulation type by a small pump in the table tank ■The motor section runs on the rail by manually rotating the handle wheel ■The motor is adjustable up and down with screws for blade height adjustment ■Materials to be processed: Stone, tiles, glass, concrete products, resin products, etc.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Brick Wet Manual Cutting Machine NC-85-550, Three-phase 200V 4kW

Brick Wet Manual Cutting Machine NC-85-550, Three-phase 200V 4kW

It is a wet-type upper blade cutting machine for refractory bricks and similar materials.

■Dimensions: 1370x670x1450mm, 115kg ■Motor: Three-phase 200V, 4kW, 1400/1700min-1 (50Hz/60Hz) ■Maximum cutting length: 500mm with Φ525mm blade installed ■Maximum cutting thickness: 190mm with Φ550mm blade installed ■Blade diameter used: Φ400 to Φ550mm, shaft diameter 40mm ■Blade cooling: Circulation type with a small pump in the table tank ■Made in Italy

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wet-type tabletop cutting machine MSG-7

Wet-type tabletop cutting machine MSG-7

It is a small wet cutting machine for tiles, glass, stone, and resin, etc.

◎Machine dimensions: 398 x 388 x 154 mm, 5 kg ◎Motor: 560W, 4A ◎Hertz: Compatible with 50HZ and 60HZ ◎Power supply: Single-phase 100V ◎Diamond blade diameter: 180 mm ◎Shaft diameter: 15.88 mm ■Note: Please be sure to select the diamond blade included in the options. ★Recommended 7-inch diamond blades for various applications★ Part number HVA404: Blade thickness 1.1 mm, grit #80/100 for thin glass Part number HVA407: Blade thickness 1.1 mm, grit #140/170 for thin glass Part number HVA408: Blade thickness 1.6 mm, grit #50 for granite and tiles Part number HVA409: Blade thickness 1.6 mm, grit #80 for marble, tiles, and glass Part number SDA408: Electroplated diamond cutter (coarse grit) for resin and others Part number HVG261: Precision cutting electroplated diamond thin blade 1.2 mm thick, grit #200 for lenses, glass, and others

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Brick Wet Manual Cutting Machine NC-50-550, Three-phase 200V 3.6kw

Brick Wet Manual Cutting Machine NC-50-550, Three-phase 200V 3.6kw

Wet cutting machine for refractory bricks, paving stones, etc.

■Dimensions: 1400x620x1500mm, 90kg ■Motor: Three-phase 200V, 3.6kW, 17.4A, 1400/1700min-1 (50Hz/60Hz) ■Maximum cutting thickness: 120mm (18-inch blade), 185mm (22-inch blade) ■Blade diameter used: Φ450–550mm (18–22 inches), shaft diameter 30mm ■Slide table: 405 (length) x 550 (width) mm ■Blade cooling: Circulation type by a small pump in the table tank

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dust-collecting built-in brick dry cutting machine iQ360X single-phase 100V

Dust-collecting built-in brick dry cutting machine iQ360X single-phase 100V

Brick dry cutting machine with built-in dust collection function, 99% dust suction.

Amazingly shuts out cutting dust in the workplace! Dust collection rate of 99%. Easy to move. For cutting refractory bricks (up to SK36), red bricks, interlocking, etc.! ■ Main dimensions: 510 x 430 x 790 mm, 30 kg ■ Cutting motor: Single-phase 100V, 1400W, 50/60Hz, 3500rpm ■ Dust collection motor: 800/600W (50/60Hz), air volume 92CFM * Power supply to the main unit is at one location ■ Total current: 20A (cutting motor 15A, dust collection motor 5A) ■ Detachable sliding table & linear auxiliary guide included ■ Blade diameter used: 14 inches (Φ355 mm), shaft diameter 25.4 mm ■ Included blade: 14-inch turbo rim (can cut refractory bricks up to SK36, red bricks, interlocking, etc.) ■ Maximum cutting thickness: 110 mm (maximum 90 mm when using sliding table) ■ Maximum cutting length: 280 mm ■ Manufactured by IQ POWER TOOLS, USA

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wet-type tabletop cutting machine Lab Saw MS150 model, single-phase 100V

Wet-type tabletop cutting machine Lab Saw MS150 model, single-phase 100V

Lab cutting machine for ores, gemstones, printed circuit boards, and test materials.

Suitable for cutting small items such as ores, gemstones, and glass. ■ Main body size: 430 x 430 x 280 mm, 7 kg ■ Motor: Single-phase 100V, 1/4 horsepower, 50/60Hz ■ Speed adjustment range: 800 to 3400 min-1 ■ Usable diamond blade diameter: Φ100 mm to Φ150 mm (4 to 6 inches) ■ Blade hole diameter: 12.7 mm (1/2 inch) ■ Table dimensions: 390 x 225 mm ■ Maximum cutting height: 40 mm for Φ150 mm blade, 18 mm for Φ100 mm blade ■ Included diamond cutters (2 types) - Φ150 notch type metal bond blade, grit 120, blade thickness 0.4 mm (for ores, rocks, etc.) - Φ150 rim type metal bond blade, grit 375, blade thickness 0.6 mm (for gemstones, glass, etc.) Options - Φ100 thin blade electroplated diamond cutter, grit 200, blade thickness 0.7 mm (for glass, printed circuit boards, resin, etc.) - Mounting cylinder and flange for 25.4 mm hole blades ■ Slide vice included (maximum opening 65 mm); the vice needs to be installed before use.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Brick Wet Manual Cutting Machine NC-EX750-5.5kw

Brick Wet Manual Cutting Machine NC-EX750-5.5kw

Brick cutting machine with a maximum cutting thickness of 280 mm (30 inches when in use).

■Overall dimensions: 1600 (excluding push handle) x 850 x 1600 mm, 250 kg ■Motor: Three-phase 200V, 5.5 kW, 12A, 1400/1700 min-1 (50Hz/60Hz) ■Blade diameter: Φ500 to Φ750 mm (20 to 30 inches), hole diameter Φ40 mm ■Motor shaft vertical range: Maximum 480 mm, minimum 245 mm from the table surface *The blade rises and falls vertically on the support column *Blade height adjustment is fixed by screws, so it cannot be adjusted during cutting ■Maximum cutting dimensions: When using a 30-inch blade, thickness 280 mm, length 465 mm *As the blade diameter decreases, the processing thickness decreases and the processing length increases ■Effective table size: 815 x 506 mm, material can be fixed with magnets ■Blade cooling: Circulation type by a small pump in the tank under the table ■Variable spindle rotation with 5.5 kW inverter included

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Cutting machine

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.